Skip to content
Gate 180 180° · 4:3 OG
ImpressumPrivacyTerms[DE]

Recording 400 Hz Gyroflow data and Audio LTC timecode on Android

How Gate 180 keeps stabilization out of the lens, measures per-lens rolling shutter skew, and locks onto Tentacle Sync or Deity TC-1 timecode boxes.

Two things usually separate a phone clip from a usable B-cam shot on a real set: motion stabilization that doesn't warp corners, and timecode that actually lines up with external audio in the edit.


Why Gyroflow hates optical stabilization (OIS)

Phone cameras try to stabilize handheld footage mechanically by floating the lens element with voice-coil motors (OIS). That works fine for casual clips, but it breaks post-stabilization in Gyroflow. The phone's gyroscope measures how the body moved, not how far the floating lens element drifted inside the module. When Gyroflow tries to counter-rotate the image from gyro data while OIS was also shifting the image independently, you get swimming edges and jello wobble.

In Gate 180, selecting GYROFLOW_RAW stabilization mode explicitly locks both OIS and electronic stabilization (EIS) off. While you roll, the app samples TYPE_GYROSCOPE_UNCALIBRATED and TYPE_ACCELEROMETER at SENSOR_DELAY_FASTEST (around 400 Hz on modern flagships), queries the active physical lens's real SENSOR_ROLLING_SHUTTER_SKEW in nanoseconds from Camera2, and writes a Gyroflow v1.3 .gcsv sidecar file with the matching Production Slate clip name (saved directly alongside the .mp4 on external USB-C SSDs via Android SAF, or in the app's gyroflow export directory for internal gallery recordings).

Drop the .mp4 and .gcsv into Gyroflow and your focal length, gyro stream, and rolling shutter timing are already aligned. If you prefer handheld stabilization without Gyroflow, you can switch back to optical OIS or turn stabilization off anytime.


Live 48 kHz Audio LTC timecode (Tentacle Sync, Deity TC-1, UltraSync)

If you run a multi-camera shoot or record dialogue to a separate sound bag, syncing clips by waveform gets old fast. Gate 180 includes a native C++20 biphase-mark LTC decoder built directly into the 48 kHz audio path.

Plug a Tentacle Sync, Deity TC-1, or UltraSync box into the phone via USB-C audio interface or TRRS splitter feeding the left channel:

  1. Switch the timecode source to external Audio LTC (EXT LTC).
  2. Gate 180 decodes incoming SMPTE frames in real time on the left channel (23.976, 24, 25, 29.97 DF, 30 fps).
  3. If the cable gets bumped or the LTC signal drops briefly, a 48-frame flywheel holds cadence cleanly until lock returns.
  4. When recording, Gate 180 automatically mutes the screeching LTC carrier tone on the recorded AAC stereo track so nobody gets blasted by timecode buzz in headphones during review.

When you are shooting solo without a sync box, you can use Free Run (INT FREE, synced to wall-clock time across app launches), Record Run (REC RUN), or dial in a manual HH:MM:SS:FF jam value.


Audio source hygiene

By default, Gate 180 requests AudioSource.UNPROCESSED at 48 kHz stereo (192 kbps AAC-LC) so Android skips the aggressive voice AGC and high-pass filtering meant for phone calls, falling back cleanly to CAMCORDER if a specific device doesn't expose an unprocessed path. While the viewfinder is open in the foreground, Android's AUDIO_RESTRICTION_VIBRATION_SOUND API mutes incoming call rings and notification vibrations so a text message won't ruin a quiet dialogue take.


Related notes: Turning off oversharpening & 16-bit RAW Bayer · Which Android phones work · Back to Gate 180

ImpressumPrivacy PolicyTerms & EULAWithdrawalAccessibilityLicenses
© 2026 Evgenii Bykov · No cookies, no trackers, no banner.